Millwright Resume Sample

Millwrights work onsite to install, maintain, and repair machinery, using hoists, forklifts, welding equipment, and other tools. Duties include checking for damaged or worn parts before machines are operated, assembling components according to blueprints or specifications, positioning heavy objects so they can be moved easily by others in the future with minimum risk of damage, replacing parts as needed, checking for signs of wear and inspecting the machines before they are put into use. For this position, mechanical abilities are important; critical thinking skills will be necessary to carry out this job. A high school diploma or equivalent is required; vocational training is preferred.

The Best Millwright Resume Samples

These are some examples of accomplishments we have handpicked from real Millwright resumes for your reference.

Millwright

  • Minimized and Eliminated Production Downtime and Equipment Malfunctions by successfully maintaining all equipment/machinery, forecasting potential issues, performing inspections, and troubleshooting issues to consistently deliver proactive resolutions.
  • Analyzed Current Conditions on a Consistent Basis to make strategic changes, adjustments, and major overhauls as needed.
  • Developed Status Reports on all Equipment Conditions/Performance and Operational Progress/Activities on a daily/weekly/monthly basis and entered data into a variety of computer programs/databases.
  • Oversaw the installation of machines, systems, and equipment that performs quality control standards on new products.
  • Maintained a loss prevention program in accordance with OSHA guidelines.

Millwright

  • Becoming familiar with all equipment and how it operates working close with operators to identify problems and create best practices.
  • Working on an e-maintenance program to create a tracking system for work being done capturing labor cost and parts for accurate budget and machine reliability.
  • Utilizing maintenance staff to create machine champion rolls to help with reliability and reduced downtime.
  • Working closely with vendors to keep parts and material shortages to a minimum.
  • Implemented OSHA-Code of safe work practice by conducting safety meetings, inspections, and training for employees.

Millwright

  • Followed diagrams, sketches, operation manuals, and manufacturer’s specifications.
  • Observed mechanical devices in operation and listened to their sounds to locate causes of trouble.
  • Dismantled devices to gain proper access and remove defective parts.
  • Created and maintained a job catalog for all job positions in the facility.
  • Gave instructions to employees regarding those operating machines at this facility. Assigned responsibilities to each employee in accordance with American National Standard Safety Code 46-1999.

Millwright

  • Preformed tasks as ironworker including erecting steel structures, rigging, welding, and operating boom trucks.
  • Experience installing pumps and motors from laying out forms and foundations, concrete, grout, and alignments.
  • Experienced in repairing burners, dampers, and expansion joints in the powerhouse.
  • Discussed safety issues with supervisors and others working on machinery in an effort to prevent accidents from occurring.
  • Completed repairs from general operating problems to facility cleaning and painting.

Millwright

  • Use torch and welding equipment to perform structural and pipe welding.
  • Prepare mechanical maintenance reports by collecting, analyzing, and summarizing information and trends.
  • Maintain equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt.
  • Instructed several individuals in safe and efficient operations of different areas of a mill.
  • Managed daily tasks for over 175 workers/employees; maintained accurate records for annual tax returns; completed multi-page financial statements twice annually.

Millwright

  • Organize and lead personnel meetings prior to critical lift activities.
  • Monitor crane stability and function as hoisting activities are being conducted.
  • Work with a team of 2-14 other millwrights to complete the maintenance of turbines and industrial.
  • Conducted routine inventory for all equipment, supplies, and yard equipment; responded to client’s service requests on time, and in a professional manner.
  • Maintained superior work ethic during continuous overtime hours while working as an hourly employee at the same location with the same department supervisor.

Millwright

  • Supervised large projects as foreman general foreman and as supervisor, conflict resolution, logistics, blueprint literacy, administrative communications, welding and welding inspection, and quality analysis and control.
  • Major projects included dams, coal and nuclear power plants, manufacturing plants, conveyors, warehouses, storage tanks, automotive plants, building all types of building exteriors, and water treatment plants.
  • Experience also included all types of welding, rigging, heavy equipment, tools, leadership, cement work, and hands-on installation and repair.
  • Provided technical knowledge, skills, and ability to install, repair, maintain, test, and inspect equipment for the successful completion of service calls.
  • Expedition in developing safe work habits by completing training programs concerning weatherization and safety compliance.

Millwright

  • Facilitated all yearly shutdown maintenance issues including but not limited to Installing new stainless steel conveyor systems, replacing worn belts, chains, sprockets, and motors.
  • Adjusted alignment of drills, cutters, dies, guides, and holding devices.
  • Fabricated large and small parts per drawing and assembled parts as required.
  • Led applicable mechanical design and integrity/ reliability issues for static and rotating equipment.
  • Identified discrepancies in machinery design and layout where safety hazards presented themselves; prepared written reports to assist management in determining corrective action.

Millwright

  • Insert shims, adjust the tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
  • Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs.
  • Layout mounting holes, using measuring instruments, and drill holes with a power drill.
  • Signal crane operator to lower basic assembly units to bedplate, and align unit to the centerline.
  • Performed general maintenance duties by working with various material handling equipment such as hoists and electromechanical motion control devices.

Millwright

  • Work on rotating equipment in an industrial environment, face pace long hours, new work scope on every job, flexible and able to overcome problems with jobs.
  • Experienced with signaling crane operators to perform critical lifts.
  • Use hand tools to disassemble repair and assemble machines, pumps, and compressors in different industrial environments.
  • Installed conveyors to provide efficient material flow through the distribution center; reduced production time by 30%.
  • Employed specialized skills to help maintain and repair electrical substations.

Millwright

  • Preventive Maintenance, Troubleshooting, installing, and repairing Pumps, Compressors, Steam Turbines, Mixers, Cooling tower fans, and other various rotating equipment.
  • Stay active in site Safety Awareness Procedures, Know blueprints, schematics, and understand policies and procedures, having knowledge in SAP.
  • Obtain Exemplary attendance and punctuality. Uphold an attitude fit for CPChem as well as the community.
  • Completed an extensive training program on facilities management, relating to the McWane Company network of power plants and substations.
  • Made recommendations for MIG welding and other maintenance projects.

Millwright

  • Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs.
  • Assemble and install equipment, using hand tools and power tools.
  • Assemble machines, and bolt, weld, rivet, or otherwise fasten them to the foundation or other structures, using hand tools and power tools.
  • Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
  • Recognized by the Operations Manager for outstanding performance.

How to Become a Successful Millwright?

Millwrights begin as an apprentice for around 4 years in the industrial setting. Can also get a two-year associate’s degree. To qualify as a Millwright, you must be at least 18 years old with a high school diploma or equivalent.

You must be capable of using a wide variety of tools ranging from hammers and wrenches to blowtorches, forklifts, and heavy machinery. Being comfortable and efficient with these tools is crucial for this type of work. Millwrights can carry and lift heavy objects and physically manipulate objects using tools and great strength. You will need to be a collaborative team member and able to work together with other individuals in accomplishing a like goal.

Millwrights could troubleshoot and follow a problem to the source using problem-solving skills. Having good problem-solving skills is not only crucial to being successful in the role but provides a safe environment for all the other coworkers as well. You will need to be able to replace defective parts of machines or adjusts alignments of moving parts. You will need to be able to repair and lubricate machines and equipment and listen to industry protocols.

Millwrights have attention-to-detail capabilities in assembling machines and bolts and a wide variety of structures using hand tools and power tools.

Wrap Up

Millwrights typically work in factory or industrial settings where they move, assemble, and install or dismantle machinery. The job requires a lot of manual labor and understanding of a number of different devices and machines. Millwrights deal with inspecting equipment and analyzing plans for new equipment.

Hope these samples gave you an idea of what your resume should look like and some tips on how to make sure that your resume stands out from the rest.

Contents

Leave a Comment